Concrete Contractor in Rye Brook, NY - Driveways and Patios That Shed Water
Benchmark White Plains Concrete Company is a concrete contractor based in White Plains, NY, and we pour driveways, patios, walks, steps and slabs for homeowners in Rye Brook, with the base dug out and packed before any concrete arrives.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
What we pour in Rye Brook
Concrete driveway building
If your Rye Brook driveway has cracked or sunk, we dig it out, pack a real base and pitch the new slab so water runs off it.
Concrete patio construction
A patio by the back door should fall away from the house. We set that slope in the forms before any concrete shows up.
Stamped concrete services
Stamped concrete gets pressed with a pattern like stone or brick while it's still soft, so the timing on pour day matters as much as the base underneath.
Concrete sidewalk building
Where a front walk has heaved or tips toward the house, we tear it out and pour a new one with joints cut where cracks belong.
Garage floor concrete
A garage floor that's cracked or sunk at the door usually needs more than a patch. We break it out and pour a level, sound slab.
Decorative concrete
Colored concrete, exposed stone or a scored pattern can dress up a Rye Brook patio or walk, as long as the slab under the looks is built right.
Concrete retaining walls
When a yard drops off or soil keeps sliding onto the driveway, a poured wall on a proper footing holds it back and gives water somewhere to go.
Concrete floor installation
For a basement, workshop or addition, we pour interior floors flat and smooth on a packed base, ready for whatever goes on top.
Concrete pool decks
Around a pool, the deck needs grip for wet feet and a pitch that sends splash water away from the pool. We plan both up front.
Concrete steps construction
Front steps take a beating every day, so we form every riser the same height and set steel inside to hold them together.
Slab foundation building
A slab foundation for a garage, shed or addition starts below the concrete. We dig out, pack the base and check the layout before the truck comes.
Foundation installation
New foundation walls carry the whole house or addition, so we set the forms square, place the steel and pour in one go where the job allows.
Concrete parking lot building
For a shared lot or a wide parking area, we grade it so water reaches the drains, and pour slabs thick enough for the traffic they'll see.
Concrete footings
Footings are the buried concrete a deck, porch or wall sits on. If they're too small or too shallow, everything above can shift, so we size them first.
Foundation raising
Where a slab or foundation has settled, raising it back toward level can beat tearing it out. I'll tell you straight which your job needs.
Concrete cutting
Need a doorway in a foundation wall, a trench for a pipe or a bad section of slab removed? We saw clean cuts so the rest stays sound.
What to know before a Rye Brook pour
Rye Brook is its own village, and we come over from White Plains as we do for Port Chester and Rye. Your price turns on the slab's size, the old concrete coming out, the base work and the finish, and the schedule on the village permit and the pour date. My estimate puts your number in writing.
Most work needs a permit
The village Building Department issues permits, and almost all interior and exterior work needs one. We handle the paperwork and tell you up front which office we'll deal with.
Check the county license
An older village sheet for exterior permits asked for the contractor's Westchester County Home Improvement License. Ask the village what applies now. We're fully licensed and insured.
Size changes the paperwork
An older village form required a stormwater permit too for jobs that disturb 400 square feet or more of land or add that much paving. A full new driveway can reach that.
What I look at first
When I come out, I check what the old slab sits on, where water runs and which way it falls, because that's usually why the old one cracked or sank.
From your call to the walk-through
I explain every step in plain words as we go, the way a good kitchen calls out each order.
Tell us about the job
Call or send the form with what you've got, a cracked driveway or a patio you've been picturing.
I come out and measure
I walk the job with you, take measurements and talk through what you want.
Your written estimate
You get a written price that spells out what's included, so nothing's a surprise later.
Prep, then the pour
Once you sign, we handle the paperwork, set a pour date, prep the base and forms, and pour.
Clean-up and walk-through
We clean up, and I walk the finished job with you before we call it done.
Rye Brook concrete questions, answered
Here are straight answers on permits, timing and cracks, and if yours isn't here, just ask me.
Still wondering something?
Call (914) 259-5254 or send the form with anything else, and I'll give you a straight answer.
Does a concrete driveway or patio need a permit in Rye Brook?
Most likely yes, because the village requires a permit for almost all interior and exterior work, and its Building Department issues them. An older village sheet also had exterior jobs get design review from the Architectural Review Board before the permit, so ask the department what applies now. We handle the filing when your job calls for it.
Can I apply for a building permit online in Rye Brook?
Yes, the village takes building permit applications from residents and contractors through its online permit portal. The same portal handles plans, inspection scheduling and checking where a permit stands. On our jobs we handle the filing, so you can just keep an eye on the status.
Does a shed slab in Rye Brook need a permit?
A qualifying shed gets relief from the village permitting process, but the Building Department asks you to check with it before you start. If we're pouring the slab under your shed, we'll find out what applies before we build the forms.
How long before I can drive on a new concrete driveway?
You'll wait longer to drive on it than to walk on it, because concrete keeps getting stronger for days while it cures, which is the wait before use. I'll give you the dates for your job before the pour, and staying off it until then is the best thing you can do for the slab.
Will my new concrete crack like the old one did?
It can, since concrete shrinks and moves, but most cracks come from a base raked level instead of dug out and packed. Like prep in a kitchen, the base is hidden on day one, so it's the first thing a cheap bid skips and the last thing I'd cut. We also cut control joints, shallow grooves that give any crack a straight line to follow.
Tell us about your Rye Brook concrete job
Send a few lines through the form or call (914) 259-5254, and we'll reply within one business day to set up your free, no-obligation estimate on site.
White Plains, NY 10601